Multiparameter Meter HI9811-5
Hanna InstrumentsDescription
- Water-resistant
- On-screen tutorial messages for calibration
- Low battery alarm
- Switch of parameters at the touch of a button
- Automatic temperature compensating gauge for more accurate pH and EC measurements
- Simple calibration
- Battery indicator
- Fast response
This hard-wearing device has been specifically designed to facilitate water quality analysis by reducing the number of instruments required. Calibration and measurement of pH, conductivity and TDS are all done using the same probe. It includes an automatic temperature compensating gauge that ensures accurate measurements. Conductivity range is from 0.00 to 6.00 mS/cm.
Characteristics of Multiparameter Meter HI9811-5
- pH: 0.0 to 14.0 pH | 0.1 pH | +/-0.1 pH
- CE: 0 to 6000 µS/cm | 10 µS/cm | +/- 2% reading
- TDS: 0 to 3000 ppm | 10ppm | +/- 2% reading
- Temperature: 0.0 to 70.0 ºC | 0'C | +/- 0.5ºC
- Battery: 1 x 9v / approx 150 hours of continuous use
- Dimensions: 165 x 75 x 41 mm
- Weight: 250g