Bubbleator B-Quick 3 Bag Kit
PollinatorDescription
Bubbleator B-Quick includes a thermometer, a metal sieve, a 220 µm pyramidal bag, a 220 µm impurity filtering bag, a 70 µm resin catching bag, and a third 25µm catching bag.
All you need in addition to Bubbleator B-Quick Kit is a 30 cm diameter bucket, some absorbent kitchen paper, and 2 kg of ice cubes.
This extraction procedure is really simple. The first step is to freeze all the plant matter. For the process to be successful the water temperature must reach 4ºC (41ºF).
Extraction procedure:
- Fill the Bubbleator with cold water and ice; mix well and check temperature (4ºC).
- Prepare the bags: starting with the one with the finest mesh, place the other bags inside it, finishing with the one with the thickest mesh. Place the frozen material inside (500 g maximum).
- Place the bags in the Bubbleator for 3-8 minutes.
- Take the bags out and drain excess water.
- Remove the first bag, in which all the residue is collected.
- Remove the second bag and keep the third bag aside (which contains the accumulated resin).
- Wrap the bag with kitchen paper to remove the remaining moisture.
- Place resin in metal sieve and squeeze with a spoon so it seeps through onto a piece of paper previously placed underneath.
- Spread out the resin on the paper and dry for at least 48 hours at room temperature.